RADIUS auth & Cisco Aironet350

[Payge]

Hi, this is a good one...

I want to enable EAP authentication on my Cisco Aironet 350, and use W2K IAS as the authenticator service. I also want to enable a session-based WEP key timeout to leverage WEP security.

In Cisco Documentation, they use Cisco Secure ACS as the authentication server, and they set up the attribute 27 (Session-Timeout) to limit the WEP key session duration.

I tried to find the attribute in the advanced attributes list under the profile button of the remote access policy, but I didn't find it. I found a session timeout under the incoming call constraints tab, and I was wondering if this option is referring at the RADIUS-standard session timeout attribute...

Does anyone have a clue on this?

 

[djjazzyjeff]

Sorry to be asking instead of answering, but my setup is the same with 352 AP and 2K IAS/Radius and 350 PC cards. I'm struggling to make this work with a domain credentials prompt on attempts by clients to associate with the AP. Any chance you could pass along your thoughts on requirements, eap, wep, etc. I'm thinking I have to use a Certificate server as setting up the remote access policy on IAS in the Authentication tab I check Extensible Authentication Protocol which lets me then select only MD5 or SmartCard or other cert for the EAP type. Is this what you had to do? Hear's hoping I hear from you as this thing is killing me and m$ is NO help, thanks bro........Jeff