Hi...
having a issue with a mikrotik radio link causing a loop between the two connected switches,
the switches can basically see the radios, the connected switch and themselves,
CRTRD00CORESWI02# sho cdp ne c4
CDP neighbors information for port C4
Port Device ID | Platform Capability
---- ----------------------------- + ---------------------------- -----------
C4 HSVIN00CORERAD01 | 5.11MikroTik R
C4 08 2e 5f 4f 8f 00 | HP J8697A Switch 5406zl, ... R S
C4 CRTRD00CORERAD02 | 5.11MikroTik R
HSVIN02CORESWI01# show cdp ne a3
CDP neighbors information for port A3
Port Device ID | Platform Capability
---- ----------------------------- + ---------------------------- -----------
A3 08 2e 5f 3e a1 00 | HP J8697A Switch E5406zl,... R S
A3 CRTRD00CORERAD02 | 5.11MikroTik R
A3 HSVIN00CORERAD01 | 5.11MikroTik R
spanning-tree on the switches obviously keeps blocking the port, not sure if im suppsoed to be disabling spanning-tree here,
I 09/02/07 23:56:16 00076 ports: port A3 is now on-line
I 09/03/07 00:13:13 00435 ports: port A3 is Blocked by STP
I 09/03/07 00:13:13 00076 ports: port A3 is now on-line
I 09/03/07 02:53:40 00435 ports: port A3 is Blocked by STP
I 09/03/07 02:53:40 00076 ports: port A3 is now on-line
I 09/03/07 03:01:33 00435 ports: port A3 is Blocked by STP
I 09/03/07 03:01:33 00076 ports: port A3 is now on-line
Not sure what info to give for the mikrotik or what I need to configure... haven't work on these much. should this be happening or do i need some additonal config on the radio link?
having a issue with a mikrotik radio link causing a loop between the two connected switches,
the switches can basically see the radios, the connected switch and themselves,
CRTRD00CORESWI02# sho cdp ne c4
CDP neighbors information for port C4
Port Device ID | Platform Capability
---- ----------------------------- + ---------------------------- -----------
C4 HSVIN00CORERAD01 | 5.11MikroTik R
C4 08 2e 5f 4f 8f 00 | HP J8697A Switch 5406zl, ... R S
C4 CRTRD00CORERAD02 | 5.11MikroTik R
HSVIN02CORESWI01# show cdp ne a3
CDP neighbors information for port A3
Port Device ID | Platform Capability
---- ----------------------------- + ---------------------------- -----------
A3 08 2e 5f 3e a1 00 | HP J8697A Switch E5406zl,... R S
A3 CRTRD00CORERAD02 | 5.11MikroTik R
A3 HSVIN00CORERAD01 | 5.11MikroTik R
spanning-tree on the switches obviously keeps blocking the port, not sure if im suppsoed to be disabling spanning-tree here,
I 09/02/07 23:56:16 00076 ports: port A3 is now on-line
I 09/03/07 00:13:13 00435 ports: port A3 is Blocked by STP
I 09/03/07 00:13:13 00076 ports: port A3 is now on-line
I 09/03/07 02:53:40 00435 ports: port A3 is Blocked by STP
I 09/03/07 02:53:40 00076 ports: port A3 is now on-line
I 09/03/07 03:01:33 00435 ports: port A3 is Blocked by STP
I 09/03/07 03:01:33 00076 ports: port A3 is now on-line
Not sure what info to give for the mikrotik or what I need to configure... haven't work on these much. should this be happening or do i need some additonal config on the radio link?