r8.1 9630g Issue

[hbsurfn]

After upgrading to 8.1 I am having an issue with 9630g phones. After the phone did it's firmware upgrade, I plug a PC into the phone and power up the phone, the PC will get an IP address, but the phone will hang on DHCP. If I unplug the PC the phone boots up fine. After the 9630 boots and I plug the PC into the phone, the PC will not get an IP address. Phone and PC worked fine on 8.0.43. Anyone else seen this?

ACIS
ACSS
APSS
CompTIA Convergence+
CCNA
CCVP
I'm also ShoreTel certified

 

[Bas1234]

Could be blocked by the switch, some switches can be set to just one MAC id. So the next MAC id never gets any traffic.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[hbsurfn]

I thought that also. But it worked fine before the firmware upgrade. I actually RMA'd one of the phones. I worked fine again until I let it do the r8.1 firmware upgrade.

ACIS
ACSS
APSS
CompTIA Convergence+
CCNA
CCVP
I'm also ShoreTel certified