Telecomboy
Programmer
All IP phones can dial out fine. The client purchased a regular single line set cordless to walk around with and for some reason calls won't go through. After looking at Monitor it appears it is not only not grabbing all the digits when dialing out, but it is also not sending the correct one's out. It is trying to send 1313431 when I have dialed a full 10-digit number. Is there a setting in the analog tab that needs to be changed? It is set to the defaults at the moment. Any assistance is appreciated.
Inbound calls do come through to it via a direct dial.
Inbound calls do come through to it via a direct dial.
