Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

R11 2400 w/ 24DTR TIE to ShoreTel

Status
Not open for further replies.
PBXDocJeff

PBXDocJeff

Vendor
Aug 20, 2010
7
US
Calling on the old NEC heads!!! Well, about 10 years and 3 laptops later I need to remember how to set up a plain T1 tie (24DTR to an SGT1K) for 4 digit dialing between an R11 NEC 2400 and a ShoreTel - nothing fancy, no caller ID - just simply 4 digit dialing - I'm mainly looking for the DPSW and ARTD - I've tried quite a few settings and while the channels will idle up the ShoreTel side will hunt channels w/ dead air when accessed (I can see it hitting the channels on the 2400 too)- the NEC gets a "rest" in the display - I'm sure it's signaling. I unfortunately dont have a spare PRI card for the NEC - I know that would be the better route (No pun intended) - Any assistance would be GREATLY appreciated!

Jeff
 
Status
Not open for further replies.

Similar threads

dmanghani
  • Question
SIP TIE
Replies
10
Views
499
CoralTech
CoralTech
vgenrikh
  • Locked
  • Question
SV9500 - Incoming calls with blocked-caller-ID get Name Display "TIE"
Replies
1
Views
150
3racefan3
3racefan3
TXtac
  • Locked
  • Question
IP Integration from 2400 IPX to UM4730
Replies
1
Views
97
belevedere
belevedere
DoubleDizzle
  • Locked
  • Question
DT900 ITK-32-LCGS-1 Compatibility w/ NEC SV9100 CP10 2
Replies
12
Views
978
CoralTech
CoralTech
bengi1234
  • Locked
  • Question
NEC 9500SE tie line to NEC 2400IPX
Replies
10
Views
145
bengi1234
bengi1234

Part and Inventory Search

Sponsor

Back
Top