R11.1 UC Module and "Wrong username or password, please try again" 4

[IamaSherpa]

Tried R11.1 SP1 news installation of UC Module, after the ignition via USB the access:

https://<IP

Office LAN1 address>:7071 as per Avaya Manual does not allow entering the system because "Wrong Username or password".
The defaut username self declared is "root" and the default password should be "Administrator" but no way to enter.
Anyone have already seen that?
Thank you

 

[Okkie26]

Administrator / Administrator ?

 

[biv343]

Known problem under investigation. I guess the answer for now is don't take a UC module to 11.1 SP1.

https://support.avaya.com/ext/index?page=content&id=SOLN354878&viewlocale=en_US

 

[derfloh]

Probably 11.1 GA and then update to SP1 will work.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[Westi]

I have to rant again

Does anyone at Avaya actually test ANYTHING?

Logging in after installing it is the most basic of tests. It is the first thing one should do.
Idjits on the job I guess.

Joe
FHandw, ACSS (SME)

Remembering intrigrant 2019

 

[IamaSherpa]

Thank you guys, If I have time I'll try the update option Derfloh.

 

[IamaSherpa]

Just as a complete feedback: upgraded from a (working and configured) R11.1 GA to R11.1 SP1, the process fails, SSA states: "USB upgrade error".
!!!!!!!!!!!!

 

[Westi]

Thanks IamaSherpa for letting us know, have some pink

Joe
FHandw, ACSS (SME)

Remembering intrigrant 2019