R1 number in qsig line

[sharif588]

i have a qsig line with cisco cube router and Aastra (new mitel) MXone BC13 , and call flow ISDN pri> cisco cube router > Q-sig > MXone.
so when i dial R1 nubmer and routed via qsig to Mxone it never work
but it always working with direct ISDN connection to MX one.

here the route config qsig:
<ROCAP:ROU=71;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
71 0110000001000010 3 2110030000 0 30 128 03151515 110100000031 001100

<ROdAP:ROU=71;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
71 SL60 H'00001310 H'00000000 H'06300000 NO


and here the direct isdn config MXOne

<ROCAP:ROU=61;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
61 5110000000000010 3 3100000001 0 30 128 00151502 111100000030 101100

END

<ROdAP:ROU=61;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
61 SL60 H'00101020 H'14400003 H'00410000 NO

can any one please help