"Your phone system is locking up our switch" PRI to SIEMENS EWSD

[adigo]

Avaya IPO 500V2 6.0.8
VCM32/PRI
DIG8/ATM4
DIG8
EMPTY

PRI IS CONFIGURED AS:
NI2
23>1
CLOCK QUALITY: NETWORK
CRC - CHECKED
CSU OPERATION - UNCHECKED
HAUL LENGTH - 0-115
LINE SUB TYPE - PRI
PROVIDER - LOCAL TELCO
FRAMING - ESF
ZERO SUPPRESSION - B8ZS
LINE SIGNALLING - CPE
INCOMING ROUTING DIGITS - 4

NO USER SOURCE NUMBER - "NI2_CALLED_PARTY_TYPE=UNKNOWN"
(as described in Avaya Tech Tip 212 and

http://www.scscblogs.com/catalysttech/index.php/2009/03/tech-tip-212-clarification/

or

http://bit.ly/aDerRO

)


(Before adding the NO USER SOURCE NUMBER "NI2_CALLED_PARTY_TYPE=UNKNOWN" outgoing calls would fail.

Now calls are working, but the carrier CenturyTel/CenturyLink says its "locking up" their switch or they think it will. They also sent me the below email:


This is what we should see:



I 70 CALLED PARTY NUMBER LEN = 8 MASKNO:09247

TYPE OF NUMBER: UNKNOWN MASKNO:09251

NUMBERING PLAN ID: UNKNOWN NUMBERING PLAN

DIGITS: MASKNO:09252

38323434313130 8 2 4 4 1 1 0 MASKNO:09249





This is what we are seeing:



I 6C CALLING PARTY NUMBER LEN = 12 MASKNO:09247

TYPE OF NUMBER: NATIONAL NUMBER MASKNO:09251

NUMBERING PLAN ID: ISDN NUMBERING PLAN



Thank you.