We are putting a new phone switch in a large building (will have over 5000 phone connections). I understand that there is software to add to a phone switch such that you don't have to manually cross-connect the outlet to a port to get dial-tone. Essentially it allows me to place any extension on any outlet. Has anyone heard of this? How does it work? If every jack is bascially "hot" don't I have to have as many ports as I have outlets?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
"soft" or "smart" phone switch
- Thread starter MikeDC
- Start date
Depending on the PBX's brand, there are some 'magical' solutions...
Kind Regards,
Maarten Copini
-Please let me know if this was of any help-
Kind Regards,
Maarten Copini
-Please let me know if this was of any help-
- Status
Similar threads
- Locked
- Question
