Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
"Internal Consistency Error" in FP2.6 Win98/Noverll 4.11
- Thread starter mzabary
- Start date
Follow the link ...
faq182-203
Hope this helps
ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com
faq182-203
Hope this helps
ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com
Check your memlimits in your config.fpw file
you will probably find you are using over 16 megs
memlimit=40,16000,16000
I have mine set to above, if I use anymore,
It crashes when it "use's all the memory",
I think I read a faq about it, something to do with fox's memory handling, should be fixed under win2000, as w2k handles all the memory (probably creates other problems! but hey!
)
Zim
you will probably find you are using over 16 megs
memlimit=40,16000,16000
I have mine set to above, if I use anymore,
It crashes when it "use's all the memory",
I think I read a faq about it, something to do with fox's memory handling, should be fixed under win2000, as w2k handles all the memory (probably creates other problems! but hey!
)Zim
deanwarner
MIS
look at the solution i put on the "NOT A DATABASE" thread
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
