Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
"Filesystem / is 93% full!!!"
- Thread starter lisluk
- Start date
This is what I do when that happens - there may be a better way and I'm sure if there is then someone will tell us but in the meantime:
Log on to Processor A using Filezilla - go to /var/log then rm messages*.bz2
Log on to Processor B using Filezilla - go to /var/log then rm messages*.bz2
Lot on to Assistant IP address using Filezilla - go to /var/log then rm messages*.bz2
Verify that the /var position is not full with df -m
Log on to Processor A using Filezilla - go to /var/log then rm messages*.bz2
Log on to Processor B using Filezilla - go to /var/log then rm messages*.bz2
Lot on to Assistant IP address using Filezilla - go to /var/log then rm messages*.bz2
Verify that the /var position is not full with df -m
- Status
Similar threads
- Locked
- Question