Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
"fast through connect" for Mobile Extension"
- Thread starter lalrl
- Start date
Hello,
From ALEX:
For an outgoing call to a remote extension, changes are done in ASB 501 04 in order to get a through connection when the called party starts ringing instead of a through connection after the called party answers the call. This will avoid the delay in speech connection after the called party answers the call. As per the current implementation, through connection takes place only after the called party answers the call and the delay is around 1.5 to 4 seconds. After the introduction of this functionality, for all calls towards a remote extension, the switch will always get through connected whenever the called party starts ringing.
From ALEX:
For an outgoing call to a remote extension, changes are done in ASB 501 04 in order to get a through connection when the called party starts ringing instead of a through connection after the called party answers the call. This will avoid the delay in speech connection after the called party answers the call. As per the current implementation, through connection takes place only after the called party answers the call and the delay is around 1.5 to 4 seconds. After the introduction of this functionality, for all calls towards a remote extension, the switch will always get through connected whenever the called party starts ringing.
- Status
Similar threads
- Locked
- Question