"Error 619: The specified port is not connected"

[IanGlinka]

I am receiving "Error 619: The specified port is not connected" when I try to establish a VPN connection using the Microsoft VPN adapter.

I am running Windows 2000 with all service packs and updates. This started happening after I installed a Cisco PIX 501 on my network. I am guessing there is some sort of default port blocking that is interfering with the VPN connection, however, I cannot seem to figure out how/what to enable in the PIX's PDM to get this to work.

Any info would be greatly appreciated.

Thanks
Ian

 

[MattWray]

If you are using PPTP, make sure port 1723 IP protocol 47 is open...

Thanks,

Matt Wray
MCSE, MCSA, MCP, CCNA

http://www.sss-steel.com

 

[ChicagoTechNet]

quoted from

http://www25.brinkster.com/ChicagoTech

What statements are required to allow a VPN inbound past my Cisco PIX?

The following example is a simple PPTP access list:

access-list 110 permit tcp any host x.x.x.x eq 1723
access-list 110 permit gre any host x.x.x.x


Robert Lin, MS-MVP, MCSE & CNE
Windows, Network and How to at

http://www25.brinkster.com/ChicagoTech

 

[djlax152]

mattwray - I don't know how to "make sure port 1723 IP protocol 47 is open" - Can this be done in the PDM?

blin2000 - I'm not trying to let a VPN connection come inbound. I'm trying to establish a VPN connection via Microsoft's VPN adapter in DUN.

Thanks for the info, but I'm still just not sure how to do what you're telling me.

Ian

 

[IanGlinka]

That last response was from me... I was on another user's computer, and they had left their login enabled.

Ian

 

[IanGlinka]

Anyone out there? Does the PIX block this connection type by default or something??

Ian

 

[MattWray]

Robert's post I believe would work inbound or outound. Just assign it to your Interface with out.

access-list 110 permit tcp any host x.x.x.x eq 1723
access-list 110 permit gre any host x.x.x.x
Int s0
ip access-g 101 out

Thanks,

Matt Wray
MCSE, MCSA, MCP, CCNA

http://www.sss-steel.com