azrael2000
Technical User
Hi All.
I am having trouble wrapping my head around something. Maybe a different explanation would help.
On a layer 3 switch I have 3 different plans with layer 3 ip addresses in different subnets. That is
vlan 10: 192.168.10.1 /24
vlan 20: 192.168.20.1 /24
The ports in each vlan have a voice and data vlan and are setup as access ports.
both are set as voice vlans. I want the pbx equipment at either end to see their compatriot, so I can switch calls between sites.
I have turned on ip routing.
Is there anything else I have to do to get the two clans to communicate between each other? I.e. ping from one vlan to the other?
Regards
I am having trouble wrapping my head around something. Maybe a different explanation would help.
On a layer 3 switch I have 3 different plans with layer 3 ip addresses in different subnets. That is
vlan 10: 192.168.10.1 /24
vlan 20: 192.168.20.1 /24
The ports in each vlan have a voice and data vlan and are setup as access ports.
both are set as voice vlans. I want the pbx equipment at either end to see their compatriot, so I can switch calls between sites.
I have turned on ip routing.
Is there anything else I have to do to get the two clans to communicate between each other? I.e. ping from one vlan to the other?
Regards