Quick help needed - Outgoing CLI from Md110!!!!

[slash50]

Hi, sorry for the rudeness of my title.

I have livened up 2 ISDN30 circuits, in the same route. The service provider show all outgoing calls on these circuits with the main billing number, but I need to change that so that the switchboard number is sent out, from all extensions.

I cannot remember and my mind has gone blank with all the other things I need to do.

Any help is appreciated )

 

[pawshman]

What BC ?

 

[slash50]

MX-One TSW

 

[parnum]

adc on the extension category isn't it?

best parnum

 

[whosrdaddy]

CPDLI:LIM=X,DIR=Y;

you need RONDI to have a complete number sent to network...


xxx

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[parnum]

or do you want the nutri? i can look it up in alex.

 

[whosrdaddy]

CPDLI+RONDI is the way to go (as long as you don't have 2 different number series on the same route)

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[slash50]

Excellent, thans guys for all your help. CPDLI was the bit I'd forgotten ) haha!! Too much stuff going on......