Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Question regarding Updating Loadware via EM.
- Thread starter dogg1
- Start date
I did a test with MGCC in EM there was already an older one on the system loaded with handle 0 and this is what the EM displayed:
Loading loadware patch from "/u/loadware/MGCCDC07.LW"
Loadware patch number is 2.
Loadware patch 0 will be removed
Loadware patch 0 has been removed successfully.
MGC Loadware patches have been put into service.
Please use UPGMG commands in Ovl143 to upgrade.
In LD 143 using "upgmg stat" you can see that the MGC now requires an upgrade and in pdt using "lwstat" you can see that the old patch handle 0 was removed and the new patch is on handle 2.
so then just LD 143 and upgmg
UPGMG <supl shelf>
UPGMG ALL [SEQ|SIM]
Loading loadware patch from "/u/loadware/MGCCDC07.LW"
Loadware patch number is 2.
Loadware patch 0 will be removed
Loadware patch 0 has been removed successfully.
MGC Loadware patches have been put into service.
Please use UPGMG commands in Ovl143 to upgrade.
In LD 143 using "upgmg stat" you can see that the MGC now requires an upgrade and in pdt using "lwstat" you can see that the old patch handle 0 was removed and the new patch is on handle 2.
so then just LD 143 and upgmg
UPGMG <supl shelf>
UPGMG ALL [SEQ|SIM]
- Status