Question re: MICS and Caller ID

[42sascha]

I have a MICS running 5.0 SW. My Trunk card is an NT7B75GD. Am I right in that to add Caller ID functionality I would need a new trunk card (NT7B75AAAG or NT5B41)? If so, is there any difference between those two cards or would either do the trick fine?

Once I get the card, after powering down and replacing the old one, would the new features automatically be available for programming?

thanks!

 

[allworxguy]

Either will work.

NT7B75AAAG is the newer version of the two.

Yes the feature will be available but you will need to program it. 5.0 only one phone per line can see CLID automatically. All the rest will need to dial F811.


Marv ccna

http://www.telemarv.ca

 

[exsmogger]

If you upgrade to R6.1 or higher then all sets with lines that appear & ring can see caller ID before answering an incoming call.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952