Question mark in NDS

[JIuel]

Hi,

Suddently this morning there is a question mark at ADMIN, at one other user and at one of the containers instead of the usual icon/symbol in C1. I haven't installede anything at all at the servers/in NDS.
I have 5 servers, each holding a replica. 3 is NW6, 2 is NW4. I'm reading the NDS and running C1 from a NW6-server.
In iMonitor and DSBROWSE I can see, that the 3 unknown objects all appears in the replicas from the NW4-servers but not in the replicas from NW6.
I have followed the suggestions in TID-10067667 without any luck. What confuses me is, that even though that I run C1 from a "good" partition I see the question marks.

Hope any one can help me out of this one, as the container with the question mark is our main department - preventing me from creating new users :-/

Jock Iuel - Denmark

 

[vale2]

have you done a dsrepair?

 

[Provogeek]

Do your NW6 servers and NW4 server participate in the same replica ring?

It is recomended that no NW4 server participate in a replica ring with any NW6 servers. There are NDS issues if they do.

Provogeek

Saving the world, one network at a time

 

[JIuel]

Thanks for the responce - and sorry for the delay!
Yes, I had done a DSRepair SEVERAL times and the 4.11 and 6-servers participate in the same ring.
As the unknown objects appeared in the replicas from the 4.11-servers (which are a kind of "service-servers" with no users attached) I simply removed the replicas on these servers and within a couple of hours the question marks was gone. And so are my problem, well, at least conserning NDS!

Thanks again for your responce

Jock Iuel - From Denmark, where the sun is shining from a blue sky.

 

[Provogeek]

Part of the reason is that DS 8.6 on NetWare 6 has atributes that DS 6.x on NetWare 4 does notunderstand.

Provogeek

Saving the world, one network at a time