CS1k Rlse 7.6
I “may” need to take up to 4-Analog ports into some type of device, that I can connect to an Ethernet network. Then at 2 different locations drop out one Analog type phone and at the farthest location drop out two Analog Type phones, with one loud ringer attached to one of the phones.
This shouldn’t be to difficult to do, just not sure where to start looking?
We could use 1140’s to make these connections, but, our IT department will not cross onto a Network that isn’t theirs, and they would require firewalls in place between the phone and the Call Server.
Any help with a device type or name of devices would be great.
I “may” need to take up to 4-Analog ports into some type of device, that I can connect to an Ethernet network. Then at 2 different locations drop out one Analog type phone and at the farthest location drop out two Analog Type phones, with one loud ringer attached to one of the phones.
This shouldn’t be to difficult to do, just not sure where to start looking?
We could use 1140’s to make these connections, but, our IT department will not cross onto a Network that isn’t theirs, and they would require firewalls in place between the phone and the Call Server.
Any help with a device type or name of devices would be great.
