Question about PA-FE-TX and 7200

[Docsharing]

Does anyone knows if PA-FE-TX supports 802.1q protocol, or only supports ISL?

Datasheet only refers ISL support.

Thanks, regards

 

[plshlpme]

well ive never really played with it and its not exactly (fx rather the tx) what your asking for but i have the following...

Slot 2:
Fast-ethernet (FX-ISL) Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 8w2d ago
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision B0
Serial number 4098485 Part number 73-1690-03
FRU Part Number: PA-FE-FX=

Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 00 3E 89 B5 49 06 9A 03 00 00 00 00
0x30: 58 00 00 00 96 12 03 00 FF FF FF FF FF FF FF FF

and if i make a subinterface i have the following iptions

DIS1(config)#interface fastEthernet 2/0.1
DIS1(config-subif)#encapsulation ?
dot1Q IEEE 802.1Q Virtual LAN
isl Inter Switch Link - Virtual LAN encapsulation
tr-isl Token Ring Inter Switch Link - Virtual LAN encapsulation

DIS1(config-subif)#encapsulation dot1Q 33

 

[plshlpme]

that was on a cisco 7204VXR using
slot0:c7200-js-mz.123-1a.bin