Quark XPress Print Area

[NickToye]

I am trying to print my quark document but it is cutting off the bottom 3 inches of the page, when i check the page setups, it is being clipped, i don't know how to fix this, i am trying to print an a4 document.

Many thanks in advance

 

[bigfeet1980]

You'll either have to learn about tiling or simply check 'fit to print' area.

 

[bigfeet1980]

Let me re-word that last post as I can't see anyway to edit. You will need to learn how to tile the page for a 100% print size which will out-put two A4 pages that you can trim-to-crop marks and tape together for a look see, or you can select 'fit to print' in the print dialoge window under the output or set-up tab I believe, and get the whole layout on an A4 page that will less than 100%.

 

[desyfer04]

Hi,

Can anyone help...?

I am trying to print a A5, onto A5 Card through my Epson2190, the image is cutting off, i have tried portrait landscape, but to know joy.

Any suggestions other than going on a course?

Thanks.

 

[dpp5]

Check your printer's page setup. Below "page attributes." is the blank page icon. Click on it. The page size and margins show the printable areas. If you wish to print outside those margins use a larger paper size and cut it down.