Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Qsig with TLU-76

Status
Not open for further replies.

ducalcity

Technical User
May 3, 2005
49
ES
Hi

I need QSIG with a card TLU-76. The route is the 90. Somebody knows how becomes?

Thanks
 
A way to do this in
BC12:

Master side:
Route nr=11, destination=5:
<rocap:rou=11;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
11 7110000000000010 5 3111000000 0 30 128 00151515 111110000031 111100

END

<rodap:rou=11;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
11 SL60 H'00000310 H'05400000 H'02000000 NO

END

<roedp:rou=11,tru=all;
ROUTE EQUIPMENT DATA
ROU TRU EQU IP ADDRESS SQU INDDAT CNTRL
11 003-1 003-0-20-01 H'000000000000
11 003-2 003-0-20-02 H'000000000000
11 003-3 003-0-20-03 H'000000000000
11 003-4 003-0-20-04 H'000000000000
11 003-5 003-0-20-05 H'000000000000

END

<roddp:dest=5;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
5 11 1545100000000250005000010 0 1 0

END

Number in coordinated numbering plan:
nansi:numtyp=ec,numse=5;
y;



Slave side
route nr 11, destination=6
<rocap:rou=11;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
11 7110000000000010 5 3111000000 0 30 128 00151515 111110000031 111100

END

<rodap:rou=11;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
11 SL60 H'00000310 H'05400000 H'02200000 NO

END

<roddp:dest=6;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
6 11 1545100000000250005000010 0 1 0

END

<roedp:rou=11,tru=all;
ROUTE EQUIPMENT DATA
ROU TRU EQU IP ADDRESS SQU INDDAT CNTRL
11 001-1 001-0-20-01 H'000000000000
11 001-2 001-0-20-02 H'000000000000
11 001-3 001-0-20-03 H'000000000000
11 001-4 001-0-20-04 H'000000000000
11 001-5 001-0-20-05 H'000000000000

END

Number in coordinated numbering plan:
nansi:numtyp=ec,numse=6;
y;




______________________________
&quot;Reload and Restart Requested
System Initiated&quot;
 
Im not sure, but according to Alex BC12 support only ISO-QSIG.
VARI D4 should be 4
 
Thanks to answer.

I have proven this configuration and it has not worked, you can say the meaning to me of VARC VARI and VARO?

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top