I need to program a TIE line from a Nortel CS1000M 5.5 to a Cisco Call Manager Server using QSIG, can someone tell me what hardware I need from the Nortel side, I would like to use a Dual DTI with a D channel daughter board instead of an MSDL, is that doable, and also what loads do I need to access and in what order to program the span on the Nortel box?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
QSIG to Cisco
- Thread starter Gallo69
- Start date
here's mine, works great, it's been up since that post without problems.. data geeks boot the ccm and it comes back up and keeps working.. we get msg lamps, names etc without fail.. we had some recent problems with calling a nortel voip, forward to a cisco wireless then back to mail. i changed rcls to int to solve that one.. it happened after a cisco upgrade
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question