Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

QSIG Question

Status
Not open for further replies.

prflash

Technical User
Nov 29, 2005
338
US
Just a simple Question

Does the Cisco support QSIG over IP trunks? I read somewhere that it does not. We are having problems passing ANI from Avaya to Cisco via H.323 trunks.


teleflash

 
What sort of problems? We have a Mitel SX2000 tied to the Cisco uning Q.SIG -

Caller ID issues depend on where your PSTN trunks are terminated. If they're terminated on the Cisco then expect calling NAME delivery problems on the Avaya. Conversely, if your PSTN trunks are terminated on the Avaya, then expect CNID issues on the Cisco. We were able to mitigate this somewhat by switching to MGCP or Combo/both, but the solution is to get rid of the intermachine tie trunks.

QSIG is a lot of things but it's not perfect. It is what it is, a compromise. QSIG passes CF Reason codes and MWI both ways without a hitch, but CallerID is problematic. Problems will go away when you turn off the Avaya and have your PSTN trunks on the Cisco (Assuming you're migrating from Avaya to Cisco)


Original MUG/NAMU Charter Member
 
In call manager under the gateway configuration do you have the redecting number IE delivery checked for inbound and outbound calls? Make sure it is checked.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top