Qsig protocol Errors

[chrisgla]

Wondering if anyone has come across an error we're seeing in maintenance terminal- may be related to long term Qsig issues.

System is connected E1 to remote Mitel via Cisco router, rather unwisely a single E1 on one Cisco is switching the Qsig at protocol level using digit plan level to three remote E1's/ Mitel's.
Unfortunately I don't have access to the Cisco...


ISDN VDsu-1 Mod 1 Port 1 - WED OCT 31 09:36:44 2012 Undefined protocol profile !!!!!!!!!!!!!!!!!!!!!!!


EDT trace VDSU L2L3:-
ISDN VDsu-1 Mod 1 Port 1 - WED OCT 31 09:39:49 2012
UAPI message sent, TotalLen - 11(Exp + Raw) ExpandLen - 11, RawLen - 0 :
PD = 8, MsgType = EVENT_REQ(152), PortID = 10fc17d8, CallID = 8216, ClientID = 79
Expanded(private IE's):
ff, 0, 1, 13, 0, 8, 4, 80, 80, 80, e4,
Raw(public IE's)


ISDN VDsu-1 Mod 1 Port 1 - WED OCT 31 09:39:49 2012 Undefined protocol profile !!!!!!!!!!!!!!!!!!!!!!!


ISDN VDsu-1 Mod 1 Port 1 - WED OCT 31 09:39:53 2012
UAPI message sent, TotalLen - 11(Exp + Raw) ExpandLen - 11, RawLen - 0 :
PD = 8, MsgType = EVENT_REQ(152), PortID = 10fc17d8, CallID = 8216, ClientID = 79
Expanded(private IE's):
ff, 0, 1, 13, 0, 8, 4, 80, 80, 80, e4,
Raw(public IE's)


ISDN VDsu-1 Mod 1 Port 1 - WED OCT 31 09:39:53 2012 Undefined protocol profile !!!!!!!!!!!!!!!!!!!!!!!


ISDN VDsu-1 Mod 1 Port 1 - WED OCT 31 09:39:53 2012
UAPI message received(CpCallback), ExpandLen - 0, RawLen 41 ExL2 0, RaL2 41:
PD = 8, MsgType = CONNECT_CONF(101), PortID = 10fc17d8, CallID = 8216, TotLen = 41(Exp + Raw)), ExpLen = 0, CES = 0
Expanded(private IE's):

Raw(public IE's)
1c, 1f, 9f, aa, 6, 80, 1, 0, 82, 1, 0, 8b, 1, 0, a1, 11, 2, 2, 8, 17, 2, 1, 2, 30, 8, 80, 6, 44, 2e, 50, 61, 72, 6b, 4c, 6, 0, 80, 31, 38, 38, 39,