QSIG issue

[pleskuk]

Hi all,

Anyone has any experience in Qsig networking with ipLDK?
I ordered Qsig license code and have PRIBE card (ISDN PRI).

I want to try to connect the ipLDK100 with a Panasonic KX-TD1232CE but to be honest my starting point is a bit confused Is there any way to connect the Panasonic (or any other) with ipLDK with Qsig and let the Panasonic users use ipLDK VoIP trunks?

I know this is kinda tricky but if anyone did that it would be nice to know.

Cheers,
Ivo

 

[doktor]

Hi Ivo

Maybe you can get some hints from these threads:

http://www.tek-tips.com/viewthread.cfm?qid=1484626

http://www.tek-tips.com/viewthread.cfm?qid=1492098

They are mostly for VoIP trunks.

Making a QSIG connection, you need to define a master system and a slave system. They are also mentioned NT and TE. NT is the "public/master" and TE is the "local/slave" system. As the PRIBE (since it has no on-board CPU) only can operate as TE, then your other PBX (Panasonic) must work as NT.
Let me know about your success!

///doktor

 

[doktor]

This one will be helpfull as it describes the programming of a PRI line to the CO (public switch):
thread1613-1490511

///doktor

 

[pleskuk]

Thanks Doktor, we will start testing in the next period.

However I have complete manuals on how to setup QSIG and IP networking with ipLDK systems.

Cheers,
Ivo

 

[doktor]

You can always use this one:

http://www.kandu.dk/spg97163.aspx

///doktor

 

[doktor]

A good manual is also found here:

http://www.lg-nortel.es/lgnortel/areatecnica/manualesldkipldk/index.html

Go for the programming manual at the "folder" ipLDK-50/100.
See pages 160-166.

///doktor