Qsig connection between Meridian and Cisco Call manager

[shroud]

Please can some one guide me in the configuration of a Qsig link between the two devices on the Meridian pabx.

Would like to know what configs. in the programming need to be made from LD 17 , LD 16 and LD 15.

Cheers,
Shroud

 

[johnpoole]

can you post the cisco side? if so i may be able to talk you through it..

john poole
bellsouth business
columbia,sc

 

[shroud]

Thanks John for the quick reply, however I unfortunately do not have the Cisco side config. All that I know is that they requested a Qsig connection direct from the Call manager to the Meridian pabx. I will try to obtain this info from them later..

 

[johnpoole]

someone in the cisco forum here might have the config

john poole
bellsouth business
columbia,sc

 

[croca]

Please check this.
If have problem i can send you a mail whith the document

http://www.cisco.com/warp/public/788/AVVID/NB_Singapore.pdf

 

[shroud]

Thanks Croc, Its really useful..it appears though, that they may now be using the Q.931 protocol instead.I believe it means the IFC in the Meridian config should be EuroISDN as the pabx is located in the UK...! Please correct me if I am wrong..!

Hi John, your opinion would be most welcome..!

 

[johnpoole]

your correct about the euro changes, we seem to forget not everyone is local

john poole
bellsouth business
columbia,sc