Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

QSIG Between MD110 BC13 and AVAYA CM 5.2 Forward issue

Status
Not open for further replies.

guipro

MIS
May 6, 2005
3
BE
Hi All,

we've recently setup a QSIG link between an MD110 BC13 and Avaya Communication Manager BC13 in Europe.

All is working fine we can call, receive calls, the number presentation is ok, we can use autocall back, transfert, conference....

but there is an issue with forwards
fe: we have 3 stations: a=avaya, b=ericsson, c=ericsson

b is forwarded to c
a is trying to call b

the call stay on b and don't follow the forward to c

in the BC13 trace we can see an " unrecognised operation"

in the other way:

d=avaya, e=ericsson

d is forwarded to a mobile (GSM)
e is calling d the mobile is ringing we can pickup the call but there is no voice and after 3 seconds the call fail with a message TIME OUT displayed on the phone

If someone already get this kind of issue his help will be more the usefull

many thx in advance

Guillaume
 
any configurations problem, LIDAP networking features allowed?
how do you divert? a21a....b , PELPI or CDINI?
the extensions serv d6=2?
ROCAP
RODAP
RODDP
I would check on AVAYA first....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top