Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

QoS on IPO

Status
Not open for further replies.
B657

B657

Programmer
Jul 19, 2007
78
GB
What configuration is required on an IPO to enable QoS on the LAN port. Its IP phones on a single site.

Thanks
 
Sort by date Sort by votes
By default the IP Office tags the VOIP packets with DSCP46.

Kevin Wing
ACA- Implement IP Office
Carousel Industries
 
Upvote 0 Downvote
OK Thanks, and that is on the LAN port not the WAN?

So the QoS is configured on the network switches?
 
Upvote 0 Downvote
I think both ports tag by default. and yes the QOS is set up on the network switches and routers.

Kevin Wing
ACA- Implement IP Office
Carousel Industries
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lulsperger
  • Locked
  • Question
IPOffice QoS with Grandstream WP810
Replies
2
Views
296
lulsperger
lulsperger
A
  • Question
Can't register Workplace for Windows on IPO Server R12.1
Replies
3
Views
338
Menniss
Menniss
Nikos Koulioumbis
  • Locked
  • Question
IPO DEMO BUNDLE
Replies
1
Views
356
snowman50
snowman50
finest
  • Question
IPO SE 12.0/12.1 Routes getting replaced with erroneous default routes on reboot 1
Replies
7
Views
428
finest
finest
NYSTECH
  • Locked
  • Question
IPO 12.0 Upgrade fails on Dell 630 servers
Replies
8
Views
1K
NYSTECH
NYSTECH

Part and Inventory Search

Sponsor

Back
Top