I am having problems printing over the network. Every time I try to print, the print job says ready and does not print. I have a novell 3.12 server. I created a queue called QMS_cx_q and print server called qms_ps. When I go to pconsole and go to print queue information I select print queue qms_cx_q, then currently attach server is socc_4. The one I created for that queue is qms_ps. Should the print server that I created be used or can I use another print server already created to service that queue. Can someone please help me to configure this qms printer.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
QMS magicolor cx printer
- Thread starter harry5533
- Start date
DaveGoTech
Programmer
A better way to network this printer is through a 'jet direct' print server box (or connect it directly to the network if it has the ethernet option.)
- Status
Similar threads
