Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Q-sig queries

Status
Not open for further replies.

Selleb

Technical User
Jul 30, 2005
29
SG
Hi,

Would like to know for Q-sig requirement between a 8300/G700 and a CISCO router/switch integration for oversea calls reduction. Is it a must for user to purchase a CMEE software (Communication Manager Enterprise Edition) for the complete Q-sig features? Or just a normal ordinary Communication Manager (CM) will be just fine? Have realised it is very expensive for a 8300/G700 user to buy the software of CMEE.

Would like to know what extra and advanced features for Q-sig for CMEE as compare to the ordinary CM ? For the case that I have mentioned, will ordinary CM be fine ?

Thanks
 
Selleb,

basic isdn tie trunk will provide caller name/number and there is no point in setting up q.sig just for plain connectivity. hence cmee is not needed. let customer save the money for something really useful.
 
Selleb,

and by the way, why using cisco and t1 trunk? g700 has plenty of voip resources and is perfectly capable of using ether h.323 or sip trunks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top