Q-sig---Follow me

[trond456]

Hi,
We had MD110 BC9 connected through Q-sig with Alkatel system, one of the features was working fine is the direct follow me from MD110 to alkatel *21*alkatel ext#.

We have upgraded the MD110 to BC12SP9 last week and aren't able now to use this feature (direct follow me from MD110-Alkatel doesnt work), or external follow me *22# (to alkatel ext number also doesnt work), , when excuting Direct or external follow me to alkatel system message appears on the display says (Inter digit time out).

ROCAI:ROU=21,SEL=7110000000000010,SIG=011100000031,TRAF=03151515,TRM=4,SERV=2110000000,DIST=30,DISL=128,NODG=0,BCAP=111100;
RODAI:ROU=21,TYPE=SL60,VARI=15400000,VARO=06800000,VARC=00000310,FILTER=NO;
RODDIEST=51,ROU=21,ADC=0606000000000250006000000,TRC=0,SRT=1,NUMACK=0;

KSEXIIR=5024,EQU=1-1-72-06,ITYPE=19,TRAF=03030315,SERV=0002120400,CDIV=011131000,ROC=000001,CALALT=1,TRM=0,ADC=00000000010000;

Any advice,,


Note: Internal follow me and External follow me to the public switch are working fine.

 

[mundus]

try ISO Q-SIG Generic Functional protocol with
ASPAP,PARNUM=223

 

[trond456]

I changed ASPACARNUM=223,PARVAL=7; , and also ISO-Qsig (RODAI=10040000)

It is the same....Any advice
Does any one have recommended parameters???

 

[mundus]

Make a trace at unit slp60 in the lim where the connection is to the Alcatel and then use the STI program from Ericsson ( or another ) to find out the reason for the " inter digit time out

 

[trond456]

Ok I will do, but do u have an example of an MD110 connected with non Ericsson through Qsig and the pbx featues like follow me, extrnal follow me are working fine so I can compare between ROCAP, RODAP, RODDP;
Regards

 

[mundus]

Yes:
ROCAI:ROU=x,SEL=0110000000000010,SIG=111110020031,TRAF=02xxxxxx,TRM=6,SERV=2110000001,BCAP=101111;
RODAI:ROU=x,TYPE=SL60,VARI=10060000,VARO=04300000,VARC=00000310; MD is Master varo d3=3
RODDI:ROU=x,DEST=x,ADC=0525000000000050105000000,SRT=x;
ASPACARNUM=223,PARVAL=15;