Q-sig between SX2000 and Cisco

[Catutzi123]

Does anyone know if "call me back" or "leave message" features are supported between a Mitel SX2000 and a CISCO through a Qsig (ISO version) connection? If so, do you have any tips for me? I can't manage to get it to work. Thanks.

 

[kwbMitel]

Don't think so

https://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/360292mtl.pdf

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[MitelInMyBlood]

If you mean for integrated message waiting indication, it works fine between the Mitel and Cisco (over Q.sig).

I have a Cisco 7975 on my desk with an Octel Overture 250 on a Mitel SX2K upstream. If a caller lands in the Octel VM and leaves a message I will get a red M/W light on the handset of the Cisco phone.

Original MUG/NAMU Charter Member

 

[kwbMitel]

Thanks MIMB, I did not interpret the question as being about Message Waiting Indicators.

Catutzi123 - If you're asking about MWI then look at the previously provided link and make sure all of your Feature Codes and Classes of service are configured correctly.



*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.