wayne50
Technical User
- Jan 28, 2004
- 147
What is the procedure for installing this module in a 2000ivs2,any programming needed. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PZ-M537
- Thread starter wayne50
- Start date
- Status
Please use the following procedure to clear the PZ-M537 when adding to an existing working CP14/CP16:
1. Back-up PBX database.
2. Power down PBX and install PZ-M537 on MP.
3. Power up PBX and perform B load.
4. Power down PBX and remove PZ-M537 from MP.
5. Power up PBX and reload database.
6. Power down PBX and reinstall PZ-M537 on MP.
7. Power PBX up.
1. Back-up PBX database.
2. Power down PBX and install PZ-M537 on MP.
3. Power up PBX and perform B load.
4. Power down PBX and remove PZ-M537 from MP.
5. Power up PBX and reload database.
6. Power down PBX and reinstall PZ-M537 on MP.
7. Power PBX up.
- Status