PWR0001 and BSD090 1

[JcBWF]

Been working with vendor on issue for several days. Keep getting these alarms. PWR0001 PWSP 01 3 2 and BSD090. Have looked them up and know that the PWR is telling me Column1 Shelf3 Supply2 and know that is the Ring Generator. Have replaced Power supply and Ring Gen and still can not clear alarm. Have also done INI, but not since replacing the Ring Gen.

any suggestions?


Perfection is expected, Excellence is Tolerated

 

[JcBWF]

Sorry forgot to mention it's an 81C at 5.0

Perfection is expected, Excellence is Tolerated

 

[tnphoneman]

Try pulling the power monitor and see if the power light comes on in the shelf if it does replace the system monitor in that column.

Signature===========================================

http://www.greatwhitetechnologies.com

 

[StoneColdphoneman]

I had similar problem and I found loose ground.

 

[asodoma]

Just to be sure, Shelf 3 is the top shelf. Shelf 0 is the bottom.

 

[JcBWF]

Found the problem...Bad analog card pulling the power supply down.

Perfection is expected, Excellence is Tolerated