I've got a PV110T with two VS80 drives. I'd like to get both drives to be used for the back-up. What would be nicest is when I've got a tape in one of the drives the job wil aoutomatically take that tape. This means I only have to change tapes every two days.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PV110T using both drives
- Thread starter mckinzie
- Start date
Put both drives in one device group. ARCserve then can treat the PV110T as a tape library with 2 slots.
This way you can set up one job that will take a new tape each day (by using media pooling) so you can change tapes every two days.
regards
This way you can set up one job that will take a new tape each day (by using media pooling) so you can change tapes every two days.
regards
davidmichel
Technical User
ahhh with a library device groups are per slots and not drives, device the slots into two groups, one job to each group.
- Status
Similar threads
- Locked
- Question