Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Putting external HD in a new Enclosure

Status
Not open for further replies.

queefdemon

Technical User
Oct 2, 2006
2
US
I recently dropped my 250g fantom drives external hard drive and it bent the power prongs on the inside of the enclosure making the hard drive turn off whenever its power cord is isnt bent a certain way. I was wondering if i could remove the HD from its defective case and put it in a new one would it retain all of the information and, more importantly, work.
thanks
 
As long as the connections on the drive it's self are not damaged it should work & you will not loose any data. Drive enclosures are reasonably cheep.
 
No the Hard drive itself is perfectly fine, im a dj and i do everything strictly thru my laptop, but i have work wednesday, so i just wanted to make sure it would work if i went out and bought an enclosure today, thanks for the quick reply, ill post back after i get the enclosure if i have any sort of problems. thanks again.
 
You should be fine then. Just make sure that the drive is connected correctly in the new enclosure & you should be OK.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top