Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pushing FW onto digital 1408 phones

Status
Not open for further replies.
tciotti2003

tciotti2003

Technical User
Jan 3, 2012
51
US
Does anyone know if there is a way to reset these digital phones to load FW and do them more than 1 at a time? Can the reset board command be used? We have 400 phones to do and it seems to take about 7 to 8 minutes per unit so doing multiple phones at 1 time word spped up the process...
 
Sort by date Sort by votes
MV_IP tel software will do 50 phones in one block , and you are correct "busy board ******" then "release board ******" will act as a physical card pull and will reset the phones and allow them to grab the files.


APSS (SME)
ACSS (SME)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Rosesam
  • Locked
  • Question
4360SW FW...
Replies
0
Views
203
Rosesam
Rosesam
JustinMB
  • Locked
  • Question
Need old FW for 9611G or need to bypass minimum FW requirements on upgrade.
Replies
0
Views
204
JustinMB
JustinMB
hebegb41
  • Question
Avaya SM/CM 8.1 J139 SIP phones and "bridged Appearances"
Replies
4
Views
311
hebegb41
hebegb41
Traveler74
  • Question
Run a report to find the old 1120/1140 phones on our network
Replies
2
Views
321
Shaun E
Shaun E
jjenuine
  • Locked
  • Question
CM10.0> Internal CID not working on a few phones - sorta
Replies
0
Views
122
jjenuine
jjenuine

Part and Inventory Search

Sponsor

Back
Top