We are changing from a T1 trunk to an ISDN trunk. I set up an ISDN trunk for testing on our Avaya s8710. I am trying to push calls from a specific phone number down the new ISDN trunk for testing purposes. I would also like to monitor that trunk while I make calls. Any help? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Push calls to trunk and monitor
- Thread starter snajo617
- Start date
You can do it a few different ways:
You can create a new route pattern with the ISDN trunks in it and add a single number to the ARS tables pointing to that route pattern. Use 'list trace station [extension]' to monitor the call progress.
Use Partition Routing by creating a new COR that has a different Time of Day entry. Add the new Route Pattern to the Partition Route Table, Modify the ARS tables to send the calls to px (partition x). Change your station to use the new COR.
Kevin
You can create a new route pattern with the ISDN trunks in it and add a single number to the ARS tables pointing to that route pattern. Use 'list trace station [extension]' to monitor the call progress.
Use Partition Routing by creating a new COR that has a different Time of Day entry. Add the new Route Pattern to the Partition Route Table, Modify the ARS tables to send the calls to px (partition x). Change your station to use the new COR.
Kevin
- Status