Pulling TNB Analog info into Excell Spreadsheet

[Deweyhumbolt]

I have 1400 built analog ports on my Option 81C. I'm charged with getting this info out of the Nortel and into a spreadsheet so that a script can be built to program Cisco VGs in order to cut over all analog ports. I know at least half these analog ports are old modems or telephones long ago disconnected. This script could save me weeks. If I can provide this intel to the Cisco techs, I do not have to do ANY Cisco programming. The field for the Cisco VGs is in the middle of my racks. So, I can just move jumpers on one end, come cut day. Thanks in advance.

"Adversity is Opportunity

 

[Firebird Scrambler]

Try my guide at

http://ghtrout.net/conversionutility.html

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[SwitchWitch]

If you're using PuTTy, do a simply copy & paste.

ld 81
REQ lst
CUST 0
FEAT 500
This is going to list all of your analogue lines.

Now go to the upper left corner of the screen (near the IP address) and select COPY ALL TO CLIPBOARD

Go into Excel and Paste.

A Tek-Tip Lover