Pulling PRI Configuration Information?

[BigPhoneDaddy]

Its been a long time since I've been in a Nortel Option 11, But I have a need to pull configuration info off a circuit. I need to see how many digits are being sent by the carrier, if its asending or desending, framing type, where the D Channel is, etc.

Any help would be appreciated...

 

[trvlr1]

in LD 22 do a print of your CEQU. This will give the layout of the circuit.ie:
DLOP NUM DCH FRM TMDI LCMT YALM TRSH
PRI 008 24 ESF NO B8S FDL 00

You will have to talk to the carrier to see how many digits they are sending and if it is asending etc.