WP 9.0.0.883 was just sent to me to cure the problem of POP90 program errors that are very often produced when I try to "publish to PDF". Corel said the new version (I had one of the first version 9's) would fix this but it does not. Anyone have some advise? I run Win 2000 Pro on a PIII-500 w/256 megs of ram.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Publish to PDF produces POP90 error
- Thread starter rjr
- Start date
Look at the information at the following links and see if they apply to your problem:
These are just a few examples of what kind of things can create the problem you are having. I would suggest replacing the old version of the pop program with the instructions found under the first link. If you have any graphics in your file at all that you are trying to publish, make sure that they have enough resolution but are not too big.
You may also want to try this option if the other things do not work:
Even though this is in reference to Presentations it may solve your problem.
Good Luck!
These are just a few examples of what kind of things can create the problem you are having. I would suggest replacing the old version of the pop program with the instructions found under the first link. If you have any graphics in your file at all that you are trying to publish, make sure that they have enough resolution but are not too big.
You may also want to try this option if the other things do not work:
Even though this is in reference to Presentations it may solve your problem.
Good Luck!
- Status
Similar threads
