mothandras
IS-IT--Management
What do these acronyms mean?
What should they be set to for each active set?
What should they be set to for each active set?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pub OLI:, Priv. OLI:
- Thread starter mothandras
- Start date
- Status
It depends. The public is for DID calls from outside the system from the CO. Private is for dialing other BCM's extensions on your network. If you don't have other BCM's on your network then private doesn't need to be programed. The pub and private are used in routing too.
curlycord
Programmer
The first question:
OLI - Outgoing Line Identification
PRIV - Private
PUB - Public
To add you would enter the users DID (private line) number so it shows up as the caller id.
=----(((((((((()----=
curlycord
Toronto Canada
OLI - Outgoing Line Identification
PRIV - Private
PUB - Public
To add you would enter the users DID (private line) number so it shows up as the caller id.
=----(((((((((()----=
curlycord
Toronto Canada
- Status
Similar threads
- Locked
- Question
- Locked
- Question