Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PSTN connection location

Status
Not open for further replies.
draylan

draylan

IS-IT--Management
Jul 29, 2004
54
SG
Hi,

Sorry for the total noob question here but we will be testing an Audiocodes Mediant 1000 (Lync) gateway directly to our existing PRI which is currently connected to our Nortel Meridian Opt11C. I would like to know where I can find the connection to switch from the PBX to our new gateway. Is it just a regular RJ45?

Thanks in advance.

David
 
Sort by date Sort by votes
The old Option 11's used an amphenol connector on one end and a DB15 on the other. Then typically you had to use a DB15 to RJ45 converter to plug into the CSU or the Telco smart jack. They have since replaced this with an amphenol to RJ45 connector.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

HollTel
  • Question
TTY - PMS connection not working - Nortel CS1000 Rls 7.0 4
2
Replies
29
Views
2K
MossEng
MossEng
krtcomm1
  • Locked
  • Question
CLID on tandem calls outbound to PSTN when calls are forwarded externally
Replies
6
Views
194
krtcomm1
krtcomm1
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
106
bltodd
bltodd
krtcomm1
  • Locked
  • Question
911 tandem call from Cisco Call Manager QSIG to CS1000 and then to PSTN generates two calls
Replies
0
Views
46
krtcomm1
krtcomm1
lundangler
  • Locked
  • Question
Fax Server using NRS to PSTN
Replies
2
Views
54
AvayaHE
AvayaHE

Part and Inventory Search

Sponsor

Back
Top