Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PSTN Call Dropping Issue

Status
Not open for further replies.

JDUST

Vendor
Oct 29, 2001
10
GB
We have a newly installed site that we have an issue with, when a call is sent out of the local gateway it will ring on the phone at the other end once and then drop the call.

The router we are using as the gateway is: Cisco 1700 IOS Rls 12.3(11)T3.

Here is what we get when we debug the call:

*Mar 1 07:42:55.945: ISDN Se1/0:15 Q931: Applying typeplan for sw-type 0x12 is
0x0 0x0, Calling num 6314
*Mar 1 07:42:55.949: ISDN Se1/0:15 Q931: Applying typeplan for sw-type 0x12 is
0x0 0x0, Called num 07989491024
*Mar 1 07:42:55.953: ISDN Se1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0068
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98388
Exclusive, Channel 8
Calling Party Number i = 0x0081, '6314'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '07989491024'
Plan:Unknown, Type:Unknown
*Mar 1 07:42:56.129: ISDN Se1/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x80
68
Channel ID i = 0xA98388
Exclusive, Channel 8
*Mar 1 07:42:58.601: ISDN Se1/0:15 Q931: RX <- ALERTING pd = 8 callref = 0x806
8
*Mar 1 07:42:58.766: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x0
068
Cause i = 0x8090 - Normal call clearing
*Mar 1 07:42:58.930: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x8068
*Mar 1 07:42:58.938: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0
x0068

Has anyone experienced this problem before and if so how did you overcoem it?

J



 
Called party number is preceeded by a "0". Not sure if this will cause a problem or not but it looks fishy to me. I would expect there would be nothing there, or a "1" there.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top