Pseudo TTY error

[PhoneGuyy]

I am getting the following error across my screen periodically and it just started since I have completed our upgrade to 5.50. I cant seem to find what it is talking about as everything is in working order. Any ideas would be of help...thanks


SEC054 A device has connected to, or disconnected from, a pseudo tty without authenticating

 

[tnphoneman]

Sounds like OTM/TM or pass through from signaling server to PTY port.

Signature===========================================

http://www.greatwhitetechnologies.com

 

[Eddie79it]

It's quite simple.
This message it's normal on pty if you use tm (both overlay passthrough or TM web Station Admin.
If you don't setup the authentication it's normal.

 

[Avaya911PLM]

To be a little more specific, this occurs when a RLOGIN session is established with the Call Server on the ELAN. As stated earlier, it is probably TM logging in.

When you use SSH, this is not generated. It is not an error per se, just a notification.

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast

 

[PhoneGuyy]

So if I am operating on only my internal network then I dont need to worry about SSH...right?

 

[Avaya911PLM]

You have to use SSH. If you network guys don't need to get involved, then you are ok.

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast