Proxy Server 2.0

[DougP]

I had Proxy Server 2.0 setup correctly<br>
Then the Harddrive crashed (I know why did'nt I back up)<br>
(So new I did'nt map a drive yet)<br>
But anyway I get and Error when I click on Security button<br>
<br>
&quot;Packet Filtering Cannot be enabled because ther is no External Network Interface&quot;<br>
But yet I can get out through it on the clients.<br>
I need to enable this so I can set up Filters or not to allow differnt ports to work.<br>
<br>
Front page dose not work any more cause it can't connect and Telnet either.<br>
<br>
<p> DougP<br><a href=mailto: dposton@universal1.com> dposton@universal1.com</a><br><a href= > </a><br>

 

[Guest_imported]

Try deleting the Network protocol(s) and adapter(s) then re-installing. <p>John Vogel<br><a href=mailto:johnvogel@homepage.com>johnvogel@homepage.com</a><br><a href=

http://i.winfire.com/s/isapiEng.dll/wf.exe?cmd=rl&452,20004878&wf.exe>Get

FreeDSL Service</a><br>[To a get FREE DSL Modem WITH FREE DSL Unlimited Internet Connection click the above link ]

 

[dxd]

verify the LAT does not include IP address' or range that is being used by the external interface.<br>
<br>
<br>
<br>
dxd

 

[DougP]

Thanks<br>
I fixed it <br>
I had to un-instal proxy<br>
then re-install it<br>
and update teh WSP client in the Server where eXchange is installed cause they are 2 separate Servers<br>
So it's all working fine<br>
<br>
And DSL is FAST<br>
If you can get it do it<br>
It is cheaper if you get a dynamic IP from the provider but you need a standalone server with 2 NIC's Proxy Server 2.0 <br>
<br>
thats what I set up<br>
<p> DougP<br><a href=mailto: dposton@universal1.com> dposton@universal1.com</a><br><a href= > </a><br>