Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Proper Power-Down Procedure
- Thread starter dp1234
- Start date
Here is what the Wiki says, I would start with the BCM Gateway if you have one then the UCX itself.
system>shutdown>halt if you are going to remove power.
or
system>shutdown>reboot if you just want to reboot system.
system>shutdown>halt if you are going to remove power.
or
system>shutdown>reboot if you just want to reboot system.
- Status
Similar threads
