Prologix inads line/modem config

[nappers]

Hi All,

We are installing a prologix R8. We have a US Robotic 33.6 fax/modem sportster. The settings are currently set as follows:

DTR set to normal
Verbal Result codes is on
Supress Result Codes is on
No echo, offline commands is on
Auto-answer on first ring is on
Carrier detect normal is on
Load nvram defaults is on
Smart mode is set to off

So, the dipswitches are set as follows:
1=up
2=up
3=up
4=down
5=up
6=up
7=up
8=down

With the modem set as above we can dial in but instead of receiving a login prompt, we hit return and get ATZ0 and then get disconnected. We have tried other settings, but only receive garbage on the screen. Can anyone help me out?

Thanks,
Nappers

 

[bhanson184]

This is from Avaya's CMC Installation document.
U.S. Robotics Model 839 External Modem dip switch settings:
1) UP - DATA TERMINAL READY
2) UP - VERBAL RESULT CODES
3) DOWN - DISPLAY RESULT CODES
4) UP - ECHO OFFLINE COMMANDS
5) UP - AUTO ANSWER ON FIRST RING
6) UP - CARRIER DETECT NORMAL
7) UP - LOAD NVRAM DEFAULTS
8) DOWN - SMART MODE

I got this from

http://www.Avaya.com

Go to Product Documentation.
From there good luck.

BHAnson