Prologix C-LANs & system access

[grayml57]

Can a Prologix have 2 CLAN boards installed and operational at the same time? There is LAN access to one of the CLAN boards at present. This system was moved from another location and I need to configure it for another local network. If 2 CLAN boards can be in the system at the same time can I access the system through the operational CLAN, have the other CLAN disabled and configure it for the new LAN and then have both operational? Or is that not recommended or possible?

Using ASA I should be able to connect using the serial port on the system, is that port a DB25 or DB9? I'm not at the site to see what is in place.

Thanks

 

[AvayaTier3]

Prologics can have multiple clan boards
SAT connection is on the processor interface cable
P3 - 25 pin to 9 pin adapter needed

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]